The Pulse SeriesAdjustable Cable Crossover is a stand-alone cable crossover machine with two adjustable high/low pulley stations and a connector that offers dual chin-up bar options. The Crossover adjusts quickly to give users a wide range of exercise options.
Pulse Series 29 Cross Cable
Weight Stack Standard 260 lb / 120 kg Options Rubber Feet Standard Shroud Weight Stack Heavy 300 lb / 136 kg Weight Stack Depicted weight stack shrouds are not available Standard Frame Colors Dark Grey
Smoke Grey
Black
White
Red
Length 163 inches / 4140 mm Width 41 inches / 1030 mm Height 91 inches / 2300 mm Equipment Weight 728 lbs / 330 kg Upholstery Premium-quality upholstery with guard protective topcoat finish. Double-layer slipcover in appropriate high wear areas. Double stitching on all seams. Bolts Grade 5 black zinc in most applications. Cable Routing Wherever possible, redirection pulleys are used to route cables close to frame to minimize chance of external interference. Handles Slip-resistant rubber sleeve with machined alloy end-cap. Weight Stack On most sectorized units, the weight stack is elevated 5 inches to facilitate user pin selection from seated position. Selector Plates Each selector plate entirely precision machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. Black painted protective finish. Pivot Points and Joints Pillow block or flange-mount motor-grade rotary bearings or sleeve bearings utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Pulleys and Cables Glass-fiber-reinforced nylon pulleys with precision motor-grade ball bearings. 3/16-inch (7x19) aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch coated to 3/16 inch. The cable will conform to specification MIL-W-83420D-BARE cable only. Attachments are climbing-rated carabiner design. Frame and Finish 11 gauge (.120") and 7 gauge (.188") 2x4-inch bent electro weld steel tubing. Minimum of 3 standard bolt tabs on appropriate units. Abrasive grit pre-finish is followed by electrostatically applied, heat-cured powder coat. Guide Rods Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and retardation of rust. Bearings and Pivot Points Oversized linear reticulating ball bearings are self-aligning, sealed and running on casehardened shafts.
No Reviews YetShare your thoughts.
Be the first to leave a review.