The Pulse Series Shoulder Press / Seated Chest Press emphasizes proper biomechanics with an ergonomic, converging axis and independent pressing arm movement. The dual-position handles add to exerciser's comfort and workout variety.
Pulse Series 26 Shoulder Press / Seated Chest Press
Standard Shroud Color Black Weight Stack 265 lb / 120 kg Standard Frame Colors Dark Grey
Smoke Grey
Black
White
Red
Standard Upholstery Colors B4 Dark Grey
B7 Hazel
B8 Red
B15 Yellow
B16 Dark Bond
B17 Black
Workout Area (L x W) 61 L x 59 W / 155 L x 150 W Length 74 inches / 1880 mm Width 52 inches / 1320 mm Height 64 inches / 1620 mm Equipment Weight 530 lbs / 240 kg Weight Stack Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. Upholstery Premium-quality urethane molded-foam padding for maximum comfort. Automotive-grade, two-textured fabric features double top stitching on all seams. Adjustable Seat Yes, gas-assisted ratcheting seat adjustment Adjustments Assist ratcheting seat adjustment requires only a lift to release the lever. Adjustment points are highlighted with a contrasting color for easy identification and use. Instructional Placard Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. Bearings and Pivot Points Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. Water Bottle and Accessories Holder The non-slip drink-and-accessory tray is integrated and features large open, even surface area, easily accessible and easy to keep clean. Pulleys and Cables Glass-fiber-reinforced nylon pulleys provide strength and durability, while precision ball bearings allow effortless rotation. Cables use a 7x19 stranded wire configuration for added strength and flexibility and are coated with black pressure-extruded nylon for long lasting protection and a smooth feel. 3/16-inch (.48 cm) wire is coated to 1/4 inch (.64 cm) with a breaking strength of 4200 lb (1905 kg) and 1/8 inch (.32 cm) wire is coated to 3/16 inch (.48 cm) with a breaking strength of 2000 lb (907 kg). Frame and Finish The frame is 11 gauge (.120 in) 2x4" electro weld steel racetrack tubing. Movement arms are made of electro weld steel round tubing. The five-stage material prep/wash process is followed by an electrostatically applied, heat-cured powder coat. Bolt Down Capability Yes General Features Natural converging axis allows for more natural motion and greater range of motion. Dual horizontal and neutral handles allow for varying position of the shoulder joint. Arms counterbalance to 10 pound start weight.
Aucun avis pour le momentPartagez votre expérience, soyez le premier à laisser un avis.