
The standing calf raise is a straightforward exercise focused on strengthening the calf muscles. It's performed by standing upright, elevating onto the tiptoes to lift the heels off the ground, and then slowly lowering back down. This movement engages the calf muscles effectively, improving lower leg strength, balance, and stability. It can be done with or without weights and is a common inclusion in lower body workout routines.
Pulse Series 17 Standing Calf Raise
Weight Stack Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.
The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.
The weight stack is elevated to facilitate user pin selection from seated position.Upholstery Premium-quality urethane molded-foam padding for maximum comfort. Automotive-grade, two-textured fabric features double top stitching on all seams. Adjustable Seat Yes, assisted ratcheting seat adjustment Adjustments Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use. Instructional Placard Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. Bearings and Pivot Points Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. Water Bottle and Accessories Holder The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean. Pulleys and Cables Glass-fiber-reinforced nylon pulleys provide strength and durability, while precision ball bearings allow effortless rotation. Cables use a 7x19 stranded wire configuration for added strength and flexibility and are coated with black pressure-extruded nylon for long lasting protection and a smooth feel. 3/16-inch (.48 cm) wire is coated to 1/4 inch (.64 cm) with a breaking strength of 4200 lb (1905 kg) and 1/8 inch (.32 cm) wire is coated to 3/16 inch (.48 cm) with a breaking strength of 2000 lb (907 kg). Frame and Finish The frame is 11 gauge (.120 in) 2x4" electro weld steel racetrack tubing. Movement arms are made of electro weld steel round tubing. The five-stage material prep/wash process is followed by an electrostatically applied, heat-cured powder coat. Bolt Down Capability Yes General Features Spring-assisted back pad adjusts easily from seated position. Start position and roller pad adjust for optimal exercise mechanics. Length 54 inches / 1500 mm Width 43 inches / 1000 mm Height 72 inches / 1620 mm Equipment Weight 485 lb / 220 kg Weight Stack Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.
The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.
The weight stack is elevated to facilitate user pin selection from seated position.Upholstery Premium-quality urethane molded-foam padding for maximum comfort. Automotive-grade, two-textured fabric features double top stitching on all seams. Adjustable Seat Yes, assisted ratcheting seat adjustment Adjustments Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use. Instructional Placard Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. Bearings and Pivot Points Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. Water Bottle and Accessories Holder The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean. Pulleys and Cables Glass-fiber-reinforced nylon pulleys provide strength and durability, while precision ball bearings allow effortless rotation. Cables use a 7x19 stranded wire configuration for added strength and flexibility and are coated with black pressure-extruded nylon for long lasting protection and a smooth feel. 3/16-inch (.48 cm) wire is coated to 1/4 inch (.64 cm) with a breaking strength of 4200 lb (1905 kg) and 1/8 inch (.32 cm) wire is coated to 3/16 inch (.48 cm) with a breaking strength of 2000 lb (907 kg). Frame and Finish The frame is 11 gauge (.120 in) 2x4" electro weld steel racetrack tubing. Movement arms are made of electro weld steel round tubing. The five-stage material prep/wash process is followed by an electrostatically applied, heat-cured powder coat. Bolt Down Capability Yes General Features Spring-assisted back pad adjusts easily from seated position. Start position and roller pad adjust for optimal exercise mechanics.
Aucun avis pour le momentPartagez votre expérience, soyez le premier à laisser un avis.